How to program an NFC tag (iPhone and Android)

Write a link, contact or Wi-Fi network onto an NFC tag with a free app, set up iPhone Shortcuts, and lock the tag so nobody can change it.

Short answer. Install a free NFC app such as NFC Tools, choose Write, add a record (for example a URL), and hold your phone near the tag. Test it with another phone, then lock the tag if it will be in a public place.

What you need

  • A blank NFC tag or sticker. Our NTAG213 inlays and NTAG215 stickers work with iPhone and Android.
  • A phone that can write NFC: iPhone 7 or newer, or an Android phone with NFC.
  • A free app such as NFC Tools (available for iPhone and Android).

Write a link to a tag

  1. Open the NFC app and go to Write.
  2. Tap Add a record and choose URL / URI.
  3. Type the full link, including https://.
  4. Tap Write, then hold the top of your iPhone (or the back of your Android phone) near the tag.
  5. Wait for the confirmation.
  6. Test it with a different phone.

The same steps work for a phone number, an email, plain text, a contact card or a Wi-Fi network.

Run an iPhone shortcut when you tap a tag

On iPhone XS and newer, tags can trigger the Shortcuts app:

  1. Open Shortcuts → Automation and create a new personal automation.
  2. Choose NFC, tap Scan, and hold the iPhone near the tag.
  3. Name the tag and add the actions you want, such as turning on Focus mode, playing a playlist or opening an app.
  4. Set it to run immediately, if your iOS version offers it.

This automation lives on your phone, so it only runs on your iPhone, not on other people’s.

Android automations

Android apps such as NFC Tools can run tasks when a tag is tapped, such as turning on Wi-Fi or setting an alarm. Some tasks need a companion app; the app will prompt you.

Lock the tag (optional, permanent)

In NFC Tools, open Other → Lock tag. Once locked, the tag can never be rewritten. Lock tags in public places, like table stickers and posters, so nobody can change them. Don’t lock tags you may want to change later.

Troubleshooting

  • “Write failed”: hold still and try again, closer to the antenna.
  • Not enough memory: the record is too long for the chip. Use a shorter link or a chip with more memory; see NTAG213 vs 215 vs 216.
  • Tag on metal won’t read: use an anti-metal tag.

Questions

Can I reprogram an NFC tag?

Yes, many times, unless it’s locked.

Do I need a special writer device?

No, a phone with NFC is enough.

Can I program the NFC chip in my business card?

Business cards are set up with your profile link when we make them. Ask us on WhatsApp if you need a change.

See NFC tags and stickers

Similar Posts